Vaporator Gas Saver

Specifications:
 
    * 7.91" diameter / 5.64" length
    * 7/8" shaft with 3/16" keyway by 1.75" long (threaded center)
    * Torque constant: 1.14 in-lb/Amp (0.13 Nm/Amp)
    * 12V to 48V (has been run up to 96V / 45 sec. max. / 25 hp)
    * 72 RPM per volt (3456rpm @ 48V / continuous duty)
    * Can be used as a generator, makes power when turned (Requires 100 amp blocking diode)
    * Great for VERY low voltages at high amp loads (Perfect PMG for making hydrogen)
    * Perfect for building simple, cheap and dependable low voltage wind turbines.
    * A put-up and forget design! Expect decades of dependable service life.
    * Rain, ice and weather proof electronics.
    * Lithium/Graphite brushes last up to 275,000 hours (When used as electric generator in wind power systems)
    * 10 horsepower continuous duty at 48 volts.
    * Max motor currents: 330A for 2 minutes / 480A for 45 seconds.
    * 10 horsepower max at 48 volts continuous duty!
    * 14 horsepower max at 60 volts continuous duty with optional air cooling port.
    * 19 horsepower max at 72 volts for 2 minutes only!
    * 28 horsepower max at 96 volts for 45 seconds only!
    * Works for both CW or CCW rotations.
    * Epoxy/Lam rotor efficiency = 94% (Brushed motors convert more electricity into usable horsepower)
    * Weighs 22 lbs. / Dimensions - 8"X 9"X 9"

 
 
MANTA® #PMG226 -
Used for wind charging 6 or 12 batteries (Used in many low voltage hydrogen generators)
 
Great for charging BIG battery banks that are drained. The higher the amp load the better the efficiency.